Machine à trancher les tranches de verre
Le SG 20 is a high-precision gantry-structured wire saw specifically designed for slicing small optical glass, crystal, and ceramic parts. With a fully enclosed structure, touchscreen interface, and automatic thickness control, it delivers exceptional performance for both R&D and small-scale production.
CARACTÉRISTIQUES PRINCIPALES
1. High-Precision Slicing for Small Workpieces
Capable of slicing parts up to 200 × 200 × 220 mm, the machine uses an endless diamond wire (Ø0.3–1.0 mm) to achieve clean, low-damage slicing of hard, brittle, or high-value materials.
2. Dual Slicing Modes: Equal & Variable Thickness
Operators can choose between consistent-thickness mode and custom-thickness slicing for up to 10 different layers in one job.
3. Fully Enclosed Gantry Structure
Compact but sturdy gantry-style frame with full safety doors allows safe and quiet operation while reducing contamination and splash.
4. Intelligent Cutting Control System
Touchscreen + button-based control interface supports:
Kerf compensation
Peeling vs. non-peeling modes
Real-time slice thickness setting
Wire break detection and alarm
Production tracking and auto shutdown
5. Auto Lubrication & Fluid Cooling
Equipped with a water circulation system and automated lubrication system to ensure clean cutting conditions and reduced wear.
6. Oil Mist Collection Support
Compatible with optional oil mist recovery units for cleaner lab and production environments.
| Non. | Nom | Spécifications |
| 1 | Longueur maximale de la pièce (mm) | 200 |
| 2 | Largeur maximale de la pièce (mm) | 200 |
| 3 | Hauteur maximale de la pièce (mm) | 220 |
| 4 | Déplacement de l'axe Y de la table de travail (mm) | 200 |
| 5 | Déplacement de l'axe Z de la table de travail (mm) | 220 |
| 6 | Vitesse maximale du fil diamanté (m/s) | 58 |
| 7 | Incrément d'avance minimum sur l'axe Y (mm) | 0.01 |
| 8 | Incrément d'alimentation minimum sur l'axe Z (mm) | 0.01 |
| 9 | Répéter la précision du positionnement sur l'axe Y (mm) | 0.01 |
| 10 | Répéter la précision du positionnement sur l'axe Z (mm) | 0.01 |
| 11 | Consommation électrique totale (kW) | 1.5 |
| 12 | Source de courant | 220V 50Hz |
| 13 | Taille de la machine (mm) | 1044*943*1810 |
| 14 | Poids de la machine (kg) | 400 |
When slicing small, brittle materials like optical glass or ceramics, cutting precision and surface quality are critical. Here’s how the SG 20 stacks up against two commonly used cutting machines in labs and factories:
| Feature / Method | SG 20<br>Scie à fil diamanté | ID Saw<br>(Inner Diameter Saw) | Band Saw |
|---|---|---|---|
| Précision de coupe | ⭐⭐⭐⭐ ≤ 0.05 mm | ⭐⭐⭐⭐ High | ⭐ Low |
| Qualité de la surface | ⭐⭐⭐⭐ Smooth, chip-free | ⭐⭐⭐ Good (may need polishing) | ⭐ Rough, high chipping |
| Slice Thickness Control | ⭐⭐⭐⭐ Programmable + multi-thickness | ⭐⭐ Manual setup per thickness | ❌ None |
| Largeur de saignée | ⭐⭐ 0.3–0.6 mm | ⭐ 0.15–0.3 mm | ❌ >1.0 mm |
| Operation Simplicity | ⭐⭐⭐⭐ Touchscreen + auto feed | ⭐⭐ Requires trained technician | ⭐ Very basic |
| Tool Life & Cost | ⭐⭐ Mid | ❌ Blade wear costly | ⭐⭐ Low cost |
| Material Adaptability | ⭐⭐⭐⭐ Glass, ceramics, crystals | ⭐⭐ Thin wafers, specific sizes | ⚠️ Coarse blocks only |
| Automation Support | ✅ Full automatic slicing | ❌ Manual step-by-step | ❌ No automation |
Optical Glass Slicing
Used to cut filter glass, wavelength-selective windows, laser optics blanks, and protective glass substrates in small batches or R&D setups.
Ceramic Material Preparation
Perfect for slicing alumina, aluminum nitride, or sintered ceramics for electronic packaging, thermal insulation, or RF components.
Crystal Cutting
Enables accurate slicing of quartz plates, YAG blanks, or other photonic crystals for subsequent polishing or dicing.
Research Sample Preparation
Popular in academic labs for creating test pieces from hard or brittle materials with controlled thicknesses—supporting multi-slice, kerf-compensated, and peeling modes.
Quelle est l'épaisseur maximale que la machine peut traiter pour la découpe ?
Quelle est la différence entre cette scie à fil et la scie à ruban ?
La vitesse de coupe serait similaire, mais la qualité de la surface de coupe de la scie à fil est bien meilleure et la perte de kerf est plus faible.